Skip to content
Contact Us
Kevlar Cover-white background-400x300px
BFM® Kevlar Cover on 1 spigot - transparency background
Kevlar Cover on 2 spigots-white background-400x300px
Kevlar Cover + 2 spigots-white background-400x300px

Kevlar Cover

A flame retardant Kevlar Cover that fits over existing connectors. It is typically used in over pressure and potentially explosive applications to reduce the risk of fire.

Product Description

The flame retardant Kevlar Cover fits over existing connectors and is typically used in over pressure and potentially explosive applications to reduce the risk of fire.

Application(s):

  • Ideal for use on sifters, sieves, screeners, feeders, bin discharges,
    hoppers & conveyors.
  •  Safe for use in CIP and with a wide range of chemicals (is also available as an easily identifiable 'Wash Sleeve' stamped version)

Key Features

Range

Fits over our entire connector range

Easy installation and removal

No tools required when installing or removing cover

Conditions and Compliance

  • Vibration
  • Compression
  • Food safety
  • ATEX

Documents for Download

Specifications Sheet

Specifications

Physical Properties
  • Material/Fibre
    Kevlar (Aramid) and the wire used for the holders is 6mm 304 stainless steel
  • Colour
    Yellow
  • Construction/Finish
    Multi-filament plain weave, Scoured and heat set
  • Weight
    447 g/m2 / 13.2 oz/yd2
  • Breathable
    Yes
  • Minimum Tensile Strength (kgf/25mm) (measured as a force over a 25mm wide Ravel Strip)
    Fabric Warp 700 Filling 704 (±58 kgf) (Test Standard: ASTM 5035). (measured as a force over a 25mm wide Ravel Strip)
  • Dust tight?
    No
Operating Conditions
  • Max Operating Temp
    260°C / 500°F
  • Surge Temp
    300°C / 572°F (NB: Limited to max. operating temp of inner connector)
  • Surface Resistivity (0hms)*
    1010
  • Vibration
    Yes
  • Oscillation
    No
  • Compression
    Yes
Certification and Compliance
  • FDA and USDA
    FDA 21 CFR 177.1632
  • 3A Certified
    No, however the connector used with the cover may be 3A certified.
  • Atex-certified

    IBExU tested. Approved for all dust explosion hazardous areas. Some restrictions apply.

Dimensions
  • Available Diameters
    Ø100mm (4")
    Ø125mm (5")
    Ø150mm (6") through to Ø1,650mm (65") in 50mm (2") increments.
  • Applicable Connector Lengths
    80mm (3")
    100mm (4") to 1,000mm (3ft 3") in 50mm (2") increments
Options
  • Available as Tapered?
    Yes