Skip to content
Contact Us
Flexi Light-white background-400x300px
Flexi-Light on 1 spigot-white background-400x300px
Flexi-Light_2 spigot-white background-400x300px
flexi light-white background-400x300px

Flexi-Light Connector

A Flexi-Connector with slightly thinner Seeflex walls and a more
flexible coil.

Product Description

The Flexi-Light Connector is made from an ether-based polyurethane with a lighter 316 stainless steel wire coil than our standard Flexi, making it ideal for applications with vertical and low-frequency /occasional horizontal movement.

The Seeflex walls are also slightly thinner and the coil is much more flexible making it perfect for weigh-scale type applications, as it provides less resistance than our standard Flexi.

Application(s):

  • Used for weigh-scale applications
  • Ideal for bag feeders and for applications with irregular movement

Key Features

Lightweight

Very lightweight and flexible

CIP

CIP-safe

Vertical movement

Ideal for applications with vertical movement

Compliance

3A, USDA, EC and ATEX compliant

Conditions and Compliance

  • Vibration
  • Oscillation
  • Compression
  • Dust-tight
  • Food safety
  • ATEX

Documents for Download

Specifications Sheet

Product Options

Tool Release in action

Tool Release

For added security, this option has a significantly firmer snap-band that makes it virtually impossible to remove by hand and requires a specially shaped tool.

More Details

Specifications

Physical Properties
  • Material/Fibre
    Seeflex - Ether-based thermoplastic polyurethane
  • Colour
    Transparent
  • Construction/Finish
    Gloss/Gloss
  • Wall Thickness (+/-10%)
    0.4mm/1/64 inch
  • Breathable
    No
  • Hardness (Shore A)
    90
  • Dust tight?
    Yes
Operating Conditions
  • Max Operating Temp
    85°C / 185°F
  • Operating Temp Range
    - 20 to 85°C / - 4 to 185°F
  • Surge Temp
    105ºC / 221ºF
  • Low Temp/Flexibility
    Good
  • Surface Resistivity (0hms)*
    1010 (Tested to ASTMD-257)
  • Air Permeability
    0
  • Vibration
    Yes
  • Oscillation
    Yes
  • Compression
    Yes
Certification and Compliance
  • FDA and USDA
  • FDA 21 CFR 177.1680, 175.105 (adhesives) & 177.2600 and USDA
  • 3A Certified
    Manufactured from 3A 20-27 certified Seeflex Material and the BFM® cuff and spigot system is a 3A certified 63-04 sanitary fitting.
  • EU Approved
    (EC)1935/2004, 2023–2006 & 10/2011
  • Atex-certified
    IBExU tested. Approved for all dust explosion hazardous areas. Some restrictions apply.
Dimensions
  • Available Diameters
    Ø100mm (4") to Ø300mm (12") in 50mm (2") increments.
  • Applicable Connector Lengths
    200mm (8") up to 6,000mm (19ft8") in 50mm (2") increments
  • Wire Coil Position
    50mm/2 inches from cuff
  • Wire Coil Diameter
    1.6mm
  • Compression Ratio of Coil Section (Approx)
    4 to 1
Options
  • Available with SS Rings? (min. length for all is 150mm)
    No
  • Available with Plastic Rings? (min. length for all is 150mm)
    No
  • Available as Tool Release?
    Yes
  • Available as Tapered?
    Yes
  • Available as a one ended Connector?
    Yes
  • Quick Access Port Option?
    No